How to Change Netgear Extender WiFi Channel?

Netgear extenders are a boon to the modern era. After performing the Netgear range extender setup, you can access the fast-blazing internet speed throughout the house. In the device of Netgear, you get the flawless features and outstanding performance that enhance the internet experience.

However, in this post, we are going to tell you about the most important concept of the Netgear extender which is how to change the extender’s WiFi channel. This feature helps you to tackle an issue like the extender keeps going off. If you are not aware of the process, then you should read out this article for detailed information. So, without further ado, let’s start the process.

First, we would like to tell you about the WiFi channel because to understand the post, it is necessary for the reader to know the meaning of the WiFi channel.

What is a WiFi Channel?

Netgear extenders broadcast WiFi using the 2.4GHz and 5GHz frequency bands. Both frequency bands are divided into different channels because both work differently. The 2.4GHz band has more WiFi coverage throughout the house whereas; the 5GHz frequency band helps you with the highest data transmission. Thus, the purpose of the frequency bands is the transmission and reception of data.

You can change your WiFi channel in case you face an issue like the extender keeps cutting out. In other words, the extender drops the internet connection. In this situation, you can try to change the WiFi channel to fix the issue. Because sometimes, users select the crowded channels on which extenders face issues of getting flawless internet network. Moreover, you can also make the most of the Netgear extender potential by changing the WiFi channel.

This is what you should know about the WiFi channel of the Netgear extender. Now, let’s learn the important steps of changing the WiFi channel on the extender.

Steps: Change WiFi Channel on Netgear Extender

Here, in this section, you are going to learn all the steps to change the WiFi channel. All the steps are mentioned in detail. You just need to perform the steps in a fruitful manner.

Power On the Extender

The foremost thing that you need to do is give the power to the extender from the power source. Make sure the power source should be non-damaged.

Once you plug in the extender you need to press the turn-on button.

Connect the Extender and Router

Now, you need to access the Netgear extender and router wirelessly. Or you can also use the Ethernet cable to make the connection between the devices.

According to us, you should use the Ethernet cable because the Ethernet cable makes a strong connection instead of wireless mode.

You just need to make sure that the Ethernet cable is properly inserted into the extender and router Ethernet ports.

Open the Internet Browser

To open the browser you need to switch on the computer or laptop first. Once you turn on the computer, launch the internet browser on the device. Make sure that the browser you use is running on its latest version. Because the old version browser does not support the default web address sometimes.

Access Default Web Address

Now, you need to access the default URL of the Netgear extender. You need to insert the default address into the address bar. Ensure you use the correct web address. In case you are not able to remember the web address you can access the IP address instead.

Thereafter, press the Enter key.

Access Login Page

To access the dashboard of the Netgear extender you need to insert the default username and password into the given fields. After that, click on the Log In button.

Change the WiFi Channel

Once you click on the Log In button, you will see the Netgear extender setup wizard. From here you need to perform some sub-steps that are mentioned below:

• You need to go to Menu Settings.
• Click on the Advances settings.
• Select the Administration Setting > Wireless setting > Select the Region.
• Now you need to perform the on-screen prompts one by one to change the WiFi channel successfully.

Hence, these are the essential steps that you need to perform to change the WiFi channel of your extender. Once you perform all the setup make sure your device access the netgear_ext.

Conclusion

This is how you can change the WiFi channel of your Netgear extender. All the steps are very easy to perform. You just need to perform them correctly and you will be able to change the WiFi channel with ease.