XGhKkIjUtMwyND^t

When you upgrade to a faster, better router, don’t fling your old one. Whether through stock or custom firmware, you can likely turn it into a repeater that can carry your Wi-Fi’s signal to the dark edges of your home. We used to have a less selection of Wi-Fi routers and technologies. Most of us used routers for a sustainable connection. This year an even faster standard proliferated producing wireless speeds a heck of a lot closer to what we can expect from a standard wired connection. Regrettably, if you just upgraded, that router probably allows slower speeds than your new one. That said, if you need speed you might need to consider an alternative signal-boosting route.

Find an Agreeable Router

If you have an old router sitting around, check with the guidebook to make sure the device can be changed into an extender or a repeater, and get precise guidance. If the router doesn’t support running as a repeater or an extender using the manufacturer’s firmware, there’s another way.

System firmware: You may or may not actually need custom firmware to create a range-boosting Wi-Fi repeater out of your old router. Check your router’s admin page to find out if you can turn it into a repeater already. If not, you’ll want to look at DD-WRT to check if it supports your router.

Check Your Work

It’s time to set up your extender. Choose a place with an AC socket that is about halfway between the network’s router and the area you want to fill with Wi-Fi. Follow this up with a Speed test check on your accessible bandwidth. It’ll take some trial, a lot of error extension cord if an AC outlet isn’t in the exact correct position.  If you still face any issue you can directly call on our toll-free number and get the solution within the short span of time.