Tech ! Reviews

Linksys WiFi Extender Setup (RE6400) Guide

The Linksys RE6400 extender supports dual-band 802.11ac wireless technology. Simply, complete the Linksys WiFi extender setup process and cover around 10,000 square feet of area with the wireless network. It is a plug and play device which comes with two non-detachable external antennas. It has the capability to operate on both 2.4GHz and 5GHz frequencies simultaneously. Let’s step ahead and take a look at the Linksys RE6400 setup process.

Linksys WiFi Extender Setup (RE6400) Steps

  1. Carefully unbox your Linksys RE6400 extender.
  2. Try to place your WiFi range extender near to your home WiFi router.
  3. Take Ethernet cable and connect your extender to router.
  4. Turn on your WiFi range extender, router, and computer.
  5. Wait until the power LED on your RE6400 extender emits solid green.
  6. Once the LED turns green, run any web browser on your computer.
  7. Type extender linksys or http://www.extender.linksys in the web address bar.
  8. Hit the ‘Enter’ key.
  9. Now, you land on the Netgear extender setup web page.
  10. Enter the default Netgear RE6400 extender login credentials, and then hit the ‘Log In’ button.
  11. Carefully, follow the Linksys RE6400 extender setup steps given on the desktop’s screen.
  12. Once done, hit on the ‘Save’ button to apply the final changes.

Congrats! Your Linksys RE6400 AC1200 extender has been set up successfully. However, if you don’t find these above-mentioned steps useful to you? Follow the alternative method to set up a Linksys WiFi range extender.

Alternative Linksys RE6400 Extender Setup Method

  1. Plug-in your Linksys extender to an electric power outlet. Try to place it close to your home WiFi router during the Linksys extender setup process.
  2. Wait until the power LED emits green color.
  3. Find and press the WPS button on the extender’s panel.
  4. Now,unplug the WiFi range extender and place it between your home WiFi router and dead network spot area.
  5. Turn on your computer or laptop and try to connect it to the extender’s network to test the live Internet connection and stability.

Unable to Log in to the Linksys RE6400 Extender’s Web-Based Setup?

Accessing Linksys RE6400 extender’s web-based setup page allows users to personalize the advanced settings. If you are stuck somewhere while accessing it, this can be due to the following reasons:

  • Interrupted Internet connection.
  • The range extender is connected to the network but failed to detect the Internet connection.

Follow the below-mentioned steps if you are unable to log in to the Linksys RE6400 extender’s web-based setup:

  1. Check if your computer or laptop is connected to the Linksys WiFi range extender’s network. If not, then try to connect to it.
  2. Check the indicator LED of your Linksys extender and existing home WiFi router.
  3. Try to restart or reboot your WiFi range extender.
  4. Perform a ping test from your computer to test Internet connectivity. Run the ‘Command Prompt’ and type ‘ping google.com’ to test the Internet.
  5. Reset your WiFi extender back to default factory settings.

We hope that you have found all the answers to your queries. If still, some doubts left unanswered related to Linksys WiFi extender setup, feel free to share with us through comments.

Leave a Reply