The Linksys RE6400 is a dual-band WiFi range extender that helps to enhance the range of your currently existing Wi-Fi network. Just do Linksys RE6400 setup place the range extender in the area where your router’s range struggles to reach.
With a proper Linksys smart wifi setup, you can maximize the Wi-Fi speed up to 867 Mbps using 5GHz bandwidth and 300 Mbps using 2.4 GHz bandwidth. In terms of theoretical, it is the maximum speed among the various range extenders currently present in the marketplace.
Linksys Extender Setup RE6400 Features
Linksys RE6400 range extender is a smart-looking device with white plastic finishing. It is quite large, as per its dimensions of 21 x 16 x 9 cm. It also engraved with a couple of aerials sprouting present at its sides, which can easily place and rotate outward. This helps you to optimize their position to receive the best network signal during Linksys Extender Setup RE6400.
A single light straight strip present on the range extender’s front defines the device’s current status. Glowing solid green means everything is working properly and different flashing green, red or orange depending on the current condition. Solid green, red, or orange indicates whether the range is getting too far from the Wi-Fi router whose network range you are trying to enhance.
Advanced Connectivity Feature is Now in Linksys Extender Setup RE6400 Procedure
On the very left side, a small WPS button is present for easy one-touch Linksys RE6400 Extender Linksys smart wifi setup with your current Wi-Fi router without any headache. Over the Linksys RE6400 Extender, a power switch button is also available to power up/down the range extender – a more easy and convenient method to save power instead of removing the whole unit from the power source.
Even at the bottom of the Linksys RE6400 range extender you with find a single Ethernet socket of which you can take advantage to connect your wired devices with your current WiFi network and even you can configure your range extender with the Ethernet cable, just by visiting once to http//extender.linksys.com. This method has proven more handy if you are having an older network desktop PC or network printer.
A key point to remember: If you are finding any kind of difficulty in accessing the http//extender.linksys.com, you can try the Linksys Wifi range extender default IP address i.e. 192.168.1.1 to visit the Linksys range extender configuration page. For your information, if you ever perform Linksys Velop setup via Linksys Velop login credentials and face the same issue, then the same hack can be applied.

How Much Tough to Reset Linksys RE6400 Extender?
Sometimes because of some bugs or errors, it becomes quite difficult to use the range extender. Or mis-configuration of range extender during the setup process may lead to stuck in midway. So the best way is to reset the Linksys range extender. But many of us don’t know how to reset Linksys extender and does it quite difficult to reset to the Linksys RE6400 extender. Now you don’t need to think about this all, check out our upcoming article’s section.
Here for our valued readers only we have come up with the easiest and quick method for how to reset Linksys extender in minutes without any lag.
- Plug in your Linksys RE6400 range extender into the wall socket.
- Try to find the “reset” button on the side of the WiFi range extender.
- Tap and hold the “Reset” button for near about 10-15 seconds.
- Release the button, once all the LED lights start blinking up. So here is now your range extender is back to factory restore settings.
- Now you can easily configure your Linksys range extender again with WPS method or via connecting with ethernet and visiting http//extender.linksys.com, to customize as per your usage and needs.
If you ever want to reset your Linksys router, you can follow the same steps. Once done, refer to the steps mentioned in the user manual to set the device up from scratch. There you will also find how to login to Linksys router with ease.
Linksys RE6400 Range Extender Holds Boosted Performance
As per the test is done by some technical network experts, it comes in front that within the short range using the 5GHz bandwidth the perform almost exactly as expected and shows the 68.1 Mbps downloading speed and 71.5 Mbps uploading speed. While using the 2.4GHz bandwidth the Linksys range extender strikes near about 54.4 Mbps download and 68.7 Mbps upload speed.
At longer range network test, under the 5GHz band, the wifi router fails to deliver the network signals and the router only able to delivers up to 10Mbps speed at 2.4 GHz. After applying the range extender, it managed to touch 50.3Mbps down and 65.5 Mbps upload speed over 5GHz and over 2.4 GHz it strikes to 29.7 Mbps down and 31.6 Mbps upload speed.
Read Also: Netgear AC1750 Router Not Working After Firmware Update? sprunki horror Endless Fun Awaits!