Tips to Fix Linksys Velop Keeps Rebooting Issue
Does your Linksys Velop keep rebooting? If you nod in yes, then worry not. Even the best-performing Linksys Velop router can become a headache. But, the good news is that we can help you fix the issue. Yes, in this Linksys router troubleshooting guide, we will provide you the topmost tips that will surely help you get rid of the issue you at hand. So, what are you waiting for? Let’s start over, shall we?
Fixed: Linksys Velop Keeps Rebooting
Fix 1: Check the Velop’s Power
First, you need to check the Linksys Velop’s power supply. On the off chance if your Velop router is receiving an improper power supply, then also it can be one of the major reasons behind the issue. So, for getting the issue fixed, you need to ensure that your Linksys Velop router is plugged in a proper way. Apart from this, the Velop should be plug in to a non-damaged wall outlet.
Now, see if you are still getting the same issue. If yes, without delay give the next Linksys Velop troubleshooting tip a try.
Fix 2: Update the Velop’s Firmware
You need to update the Linksys Velop’s firmware. Look, if the firmware version on your Linksys Velop router is outdated, then also you can encounter with the rebooting issue. So, don’t think much to update the firmware of your Velop using the correct Linksys router login details.
Before proceeding further, we suggest you update the firmware of your Linksys Velop keeping its model number in mind. Yes that’s correct! Linksys Velop router firmware update instructions vary upon model to model.
Fix 3: Power Cycle Your Velop
You need to power cycle your Linksys Velop. Sometimes, due to technical glitches, your Linksys Velop may not work as per expectations, resulting in the issue. Need not to worry! We have got you covered! To keep your Linksys Velop away from technical glitches, you need to power cycle it. Wondering how to power cycle your Linksys Velop? Wonder no more! We have got you covered! We will provide you instructions to power cycle your Linksys Velop router in a hassle-free way. Scroll down a little!
- Right of the bat, disconnect your Linksys Velop router from your existing modem and unplug it (the Velop device) from the electrical power socket.
- After applying the first step, wait for a few minutes.
- Reconnect your devices and plug in your Velop back.
Now, see if you are still getting the same issue or not. Verify it by accessing Linksys Velop login page.
Fix 4: Check the Connection
Now, you need to check the connection you have made between your Linksys Velop and modem. Chances are that your devices are not connected in a proper way. Thus, for fixing the “Linksys Velop keeps rebooting” issue, ensure a proper yet secure connection between your Linksys Velop router and modem.
Fix 5: Relocate Velop
No luck? Well, the placement of your Linksys Velop router plays a very vital role when it comes to its proper functioning and smooth performance. So, to make the most out of your Velop device, you need to avoid placing it near to baby monitors, Alexa devices, play stations, cordless phones, Bluetooth speakers, gaming consoles, thick walls, windows, etc. But, do not avoid placing your Velop away from your modem.
Fix 6: Set Up Your Velop Properly
Another reason behind getting “Linksys Velop keeps rebooting” issue might be improper setup. Look, you have to keep the aforementioned troubleshooting tips into consideration, apart from this, you also have to ensure that your Linksys Velop router is configured in a proper way.
Having doubt whether you have performed Linksys Velop setup in a proper way or not? Well, in that case, resetting Linksys Velop is suggested. Linksys Velop reset process is well-known for fixing the improper setup issues. Therefore, reset the Velop first then configure it again from the scratch.
Our Linksys router troubleshooting guide on how to fix “Linksys Velop keeps rebooting” issue ends here. We hope that the troubleshooting tips we have mentioned here helped you fix the issue you were facing with your Linksys Velop router. Just in case, you get encountered with the same issue again, don’t delay much to give these fixes a try.