In the outcome of a house fire, you might be tempted to start cleansing your home right away. Nevertheless, take note that getting rid of smoke damage, as well as fire damage, encompasses some health and safety precautions. Before getting started with Surface fire damage cleaning, call a fire marshal to know whether it is safe to enter your houses.
Be sure to open doors and windows whenever possible to permit air to circulate when performing a fire and smoke cleaning project. Toxic fumes and chemical compounds from burnt objects can damage your health severely. Wear proper gear and article of clothing, including gloves and face mask. In addition to this, put a drop cloth, plastic sheet or tarp on the floor to forbid the soot stains from the ceilings.
The first step on Surface fire damage cleaning is to remove loose soot on the surface of the walls using a vacuum cleaner. Apart from using a vacuum, hard-hitting soot and smoke cleaner is a dry chemical sponge.
DO-s for Surface fire damage cleaning:
Your checklist for after a fire should contain definite non-negotiable tasks, including:
- DO contact a certified fire restoration specialist: Make sure you immediately contact a certified fire and fire restoration professional for remediation services.
- DO turn off all utilities: Turn of water, electricity and gas utilities until a professional can evaluate if any of these systems were damaged during the fire.
- DO break out the vacuum: An expert should provide restoration service, but you can increase the professional’s chances of success by doing the first pass on your own. Make use of a vacuum with a brush attachment and go over your upholstered furniture. Your furniture will appear better as soon as the soot is removed. Also, cover your furniture with a sheet if you need to sit on it while waiting for restoration specialist . This will not allow soot and ash from grinding into your upholstery.
- DO address your carpets, floors, and counter-tops: Vacuum all your floors and counter tops for an immediate and superficial improvement over the damaged state. It will cease soot from grinding deeper into the carpet’s roots. Counter-tops and hardwood floors should be wiped to forbid the soot from clinging to the surfaces.
- DO check your appliances: Your electrical utilities should be off. Remember to empty your freezer and refrigerator, and leave the doors open to forbid entrance of mold and mildew.
- DO watch on pets: keep away pets from your fire-damaged home. Lingering soot and smoke can be dangerous to them as well.
DON’Ts for Surface fire damage cleaning:
- DON’T use your AC systems, heater or other electronics: Wait until a professional arrives on the accident scene — same with appliances like the television, computers and DVD players. Turning on electronics can bring greater damage.
- DON’T clean walls and clothing: Also, do not clean walls, ceilings and related surfaces, and wait to clean your clothing and similar garments. A professional should investigate them first and provide advice.
- DON’T eat leftover food: avoid eating anything that was in the home during the fire. It I not safe eat this at all due to contamination from smoke, soot, or contaminants exposed to the environment when the fire was being extinguished.
- DON’T wipe off powder from extinguishers: Forgo trying to clean up all staining from the powder discharged by a fire extinguisher. It is to let professionals like us to guide the clean up of these areas.
These are some basic guidelines for preventing further fire and smoke damages and get a head start on cleanup, but they are not a substitute for professed restoration services. Whenever in doubt, call us for Surface fire damage cleaning. Upholstery, carpets and counters are okay to begin cleaning, but the rest depends on the pros. And keep a note, do not reenter a home until it has been cleared by the fire department or other local officials.
Fire and smoke are very damaging to one’s holdings. Within minutes, soot can cause change of color on plastic and appliance surfaces and within a few hours, it can stain grout in the toilets, counter-tops, furniture, and much more. Within days, acid substances can cause walls to yellow permanently.
If you’re wondering what to do after a fire damage, it’s always alluring to start the cleanup process immediately, and do as much as achievable. The course of action is to hire a certified professed group to provide expert knowledge and service. The situation needs specialized tools and knowledge that only a professional can provide.Consulting a professional will you reconstruct your property back to like-new condition as quickly as possible.
We come up with providing Surface fire damage cleaning that the pros trust. If you are someone looking for restoration professional services, browse through our website and book a free consultation.
